Retail hardware that works on the shop floor

Shoppers judge a store in seconds. A wobbly tablet, a kiosk in the wrong spot or a screen that's always switched off says more about your brand than any promotion.

We supply the hardware your POS, product information and self-service systems run on: counter mounts, wall mounts, floor stands, tablet enclosures and protective cases. It works with whichever POS or retail platform you've chosen.

Popular with retailers


A woman with red hair browses a clothing rack inside a boutique, holding up a white sleeveless top on a hanger. She is wearing a blue ribbed tank top and high-waisted light-wash jeans.

Built for Busy Stores

What retail stores need

Retail is tough on hardware. Devices are used by staff and customers all day, moved around for promotions and store resets, and sit in open areas where anyone can pick them up.

Four things come up in almost every store: security, so a tablet can't walk out the door. A clean, on-brand look, because the hardware is part of the fit-out. Customer-friendly height and angle, so shoppers actually use the screen. And flexibility, so displays can move when the layout changes.

Most stores are leased, and many are inside shopping centres with strict fit-out rules. That makes clamp mounts, freestanding floor stands and PoE more practical than drilling and running new power.

What a retail tablet holder actually does

A good tablet holder does three jobs in a store: it protects the tablet, controls what shoppers can access, and puts the screen where people will actually use it. Get all three right and the tablet just works. Miss one and it becomes a daily job for your staff.

Bouncepad Surface Desk Mount Bouncepad Counter Flex - Surface

Built for Everyday Impact

Protection

A housing absorbs the knocks, drops and grabs that damage unprotected tablets on a busy shop floor. On a counter or kiosk used all day, that protection soon pays for itself.

Most damage isn't dramatic. It's a tablet knocked off the counter during a sale rush, a shopper leaning on a kiosk, or a trolley bumping a floor stand during a store reset. A rigid housing takes those hits instead of the tablet's glass.

Protection also means less downtime. A cracked POS tablet slows every sale until it's replaced. For staff on the floor, a Grip Case does the same job for roaming tablets.

TS-TBL229-EEW Tab Secure Table Top in retail store

Control What Users Can Access

Restriction

A good enclosure physically blocks the ports, the power button and often the Home button, so shoppers can't exit your kiosk app, reset the device or unplug it.

It works alongside software lockdown, not instead of it. The enclosure controls what people can physically touch. Software such as Guided Access or Single App Mode controls what they can do on screen. A locked-down tablet in an open stand can still be carried off, and a sealed enclosure can't stop someone browsing away from your product catalogue.

How much restriction you need depends on who uses it. A staff stock-lookup tablet may only need its ports covered. A customer-facing kiosk on the shop floor should have its buttons and ports covered, plus a keyed or tool-locked enclosure.

A white countertop retail touch screen kiosk displaying an online fashion catalog, with a person's hand touching the screen in a softly lit boutique setting. BP-TT119-EEB_1

Positioned to Perform

Presentation and positioning

A wobbling tablet on a plastic prop looks temporary, and in retail it makes the whole display look cheap. A flush-mounted holder at the right height and angle looks like part of the fit-out, and shoppers treat it with more care.

Set the screen height for standing shoppers and wheelchair users, angle it away from spotlights and window glare, and choose a rotating mount like the Bouncepad Original Twist if customers sign up or pay on the same screen.

On walls and columns, a slim wall mount keeps price checkers and loyalty sign-ups tidy and out of the way. Plan the cable path at the same time, because moving a mount after the fit-out costs far more than getting it right first.

Planning & Considerations


Choosing the right size

Enclosures are cut for a specific tablet model, not a screen size.

Two tablets with the same screen size can have different cameras, buttons and thickness, so always order against the exact model. Use our iPad model checker to find yours, or on Android go to Settings, About tablet.

Plan for the device you'll still be able to buy. If you're rolling out across several stores, choose a model early in its life, so new stores match the first. Ask us which models we expect to stock long term.

If your tablet isn't listed, get in touch with the model number and we'll advise on fit.

Locking the tablet to one app

On iPad, Guided Access locks the device to a single app, so shoppers can't leave your kiosk or catalogue.

Turn it on in Settings, Accessibility, Guided Access, set a passcode, open your app and triple-click the top button. Keep the passcode somewhere staff can find it.

For kiosks that need to survive a power cut or restart, use Single App Mode through device management instead. It reapplies automatically, and head office can manage every store's tablets remotely. Our tablet enclosure guide covers both step by step.

Keeping the screen awake

On iPad, go to Settings, Display & Brightness, Auto-Lock and select Never, so price checkers and kiosks don't go dark between shoppers.

  • If Auto-Lock is greyed out, Low Power Mode is on.
  • If you manage devices centrally, set the timeout there instead, as it overrides the local setting.

For screens on all day, turn the brightness down where store lighting allows. It reduces heat and helps the screen last longer.

Power, data and PoE

Power over Ethernet (PoE) delivers power and network to a fixed tablet over one cable. There's no power socket needed behind a wall mount or kiosk, and no adapter for shoppers to unplug.

It needs a PoE-enabled switch or injector, and suits counters, kiosks and wall-mounted price checkers. In leased stores and shopping centres, it often saves running new power. See PoE Texas adapters and our PoE guide.

Cable management

Route and hide the cable before you finalise the mount position. A visible cable makes even a premium store look unfinished, and one at shopper height eventually gets pulled.

  • Use a through-counter fitting or a holder with an internal cable channel.
  • Keep cables away from walkways and shopper reach.
  • Don't block the enclosure's ventilation with coiled cable.
  • Avoid tablets behind glass in direct sun, the most common cause of overheating in window displays.

Browse power and cables.

Find the right hardware for your store


  • Bouncepad Core Static 60 universal desk mount, additional view 3

    Counter and desk mounts

    Fixed and rotating mounts and locked enclosures for POS, sign-ups and payment, with clamp options for stores.

    Explore Desk Mounts
  • Bouncepad Wing iPad Holder, alternate view

    Floor stands

    Freestanding kiosks for product information, endless aisle and self-service. Place them right where shoppers are.

    Explore Floor Stands
  • Bouncepad Core Branch, universal wall mount, additional view 3

    Wall mounts

    Slim and secure wall mounts for price checkers, loyalty sign-ups and staff stations, with hidden cabling.

    Explore Wall Mounts

What to specify

Each part of the store needs different hardware. Here's what to look for, and what most often gets missed.

ApplicationHardwareKey specificationMost commonly missed
Counter POSFixed or rotating counter mount with a locked enclosureRotation if customer-facing; slim footprintCable path decided after the mount is fitted
Product info or endless aisle kioskFloor stand with locked enclosureWeighted base; accessible screen height; PoEPlaced away from the products it supports
Loyalty or sign-up stationCounter mount or floor standCustomer-facing angle; app lockdownCustomers able to exit the app
Mobile POS and stock lookupProtective case with strapCorner protection; charging point between shiftsWiFi tested at the counter, not across the floor
Price checkerSlim wall mount with a locked enclosureShopper height; app lockdown; PoEScreen timing out between shoppers
Staff back-of-house tabletWall mount or desk mountPorts covered; easy to cleanLeft unsecured because it's "staff only"

Frequently Asked Questions


Where should I start?

Start with the job the tablet needs to do, not the hardware:

  • Who uses it? Staff only, or customers too. Customer-facing tablets need stronger security and app lockdown.
  • Where in the store? At the counter, on the shop floor, on a wall or at a collection point.
  • Which device? Enclosures are cut for a specific model, so check the exact model, not just the screen size.
  • How many stores? If you're rolling out to more than one, choose hardware you can repeat everywhere.

If you're fitting out a new store, talk to us before the joinery is built. Power and mount positions are cheap to plan at build stage and expensive to retrofit.

Can customers use the kiosk without staff help?

Yes, if it's set up well. Lock the tablet to your kiosk app, set the screen at a comfortable height, and place it where shoppers naturally stop. A locked enclosure keeps the device secure when staff aren't nearby.

Will the enclosure fit our next tablet?

Not always. Secure enclosures are cut for a specific model, and new generations often change size, camera or button positions. Some ranges let you swap just the enclosure and keep the mount, which makes upgrades cheaper. Check before you replace your devices.

Can I move my displays during store resets?

Yes. Floor stands and weighted bases can be moved easily, and most counter and wall mounts can be refitted. If you reset often, choose freestanding options over fixed ones.

Do you offer trade pricing for multi-store retailers?

Yes. Retail groups, POS resellers and shopfitters can become a wholesale partner for volume pricing and dedicated support. For help planning a store, get in touch or call 1800 960 015.