Hospitality hardware that survives service
Most hospitality tech problems aren't software problems. They're mounting, power and placement problems that were decided in the wrong order.
We supply the hardware your POS and ordering systems run on: counter mounts, tablet enclosures, floor stands and protective cases. It works with whichever POS platform you've chosen.
Built for Busy Venues
What hospitality venues need
Hospitality is harder on hardware than an office. Equipment runs long hours, gets handled with wet or greasy hands, sits near heat and steam, and is used at pace by staff who can't stop to troubleshoot.
Four things come up in almost every venue: permanent power, so nothing runs on battery during service. Hidden cabling, because any cable at counter height eventually gets pulled. One-handed use, as staff are usually holding something else. And wipeable surfaces for cleaning down at close.
The right hardware for every part of your venue
Most venues use tablets in three places: at the counter, out on the floor and at a self-service point. Each one has its own hardware decisions, and getting them right at the start saves costly changes later.
At the Counter
Counter and POS mounting
The biggest decision is whether the screen needs to rotate. If customers sign, tip or tap on the same device staff use to take orders, you need a rotating mount like the Bouncepad Core Swivel 60. Changing your mind later means replacing the mount, not adjusting it.
Set the angle from where staff actually stand, not where it looks tidiest. Counter space is limited, so a clamp or through-counter mount frees up the space a weighted base would take.
Plan the cable path before you fix the mount. A through-counter grommet is worth the drilling. A cable running across a wet counter isn't.
On the Floor
Order-at-table and roaming tablets
Roaming tablets will get dropped, so choose a case that suits how your staff work. A shoulder and hand strap case keeps the tablet secure while carrying plates. A Survivor case gives strong drop protection without a bulky strap. Near the bar or outdoor seating, a waterproof case handles spills and rain.
Give devices a home where they charge between shifts. Tablets left on a shelf overnight start service at 40 percent and die mid-shift.
Check WiFi where the tablets will actually be used. Good coverage at the counter doesn't mean good coverage at the back corner table.
At the Kiosk
Self-order kiosks
A self-order kiosk lets customers browse the menu and pay without queuing at the counter, which frees up staff during the rush. Put it on a weighted floor stand near the entrance, or on a counter mount where space is tight.
Set the screen at a height that works for standing customers and wheelchair users, and lock it to your ordering app.
Planning & Considerations
Choosing the right mount
Choosing the right mount
A locked enclosure on a counter mount protects the tablet, blocks the ports and buttons, and keeps it at the right height and angle for staff.
Fixed or rotating
Fixed-angle mounts suit staff-only screens like kitchen order displays. Rotating mounts, such as the Core Swivel 60, Core Twist and Core Swivel Desk, suit anywhere a customer pays, signs or tips on the same device.
Fixing options
Through-counter mounts hide the cable and save space. Clamp mounts suit leased venues where you can't drill. Weighted bases are easy to move but take up more counter space.
Enclosures are cut for a specific device model, so check your exact tablet model before ordering. Browse desk and counter mounts.
Choosing the right size
Choosing the right size
Enclosures are cut for a specific tablet model, not a screen size.
Two iPads with the same screen size can have different cameras, buttons and thickness, so always order against the exact model. Use our iPad model checker to find yours.
If you're rolling out across several venues, choose a tablet that will still be available next year, so every site matches. Universal mounts like the Bouncepad Eddy fit a range of sizes if you use different tablets.
Cases for roaming tablets
Cases for roaming tablets
A roaming tablet needs a case that survives drops, spills and constant handling. Choose by how your staff use it.
- Shoulder and hand strap cases for staff carrying the tablet between tables, with plates in the other hand.
- Survivor cases for strong drop protection without a bulky strap, when the tablet sits on the counter or goes in an apron.
- Waterproof cases for bars, outdoor seating and anywhere drinks get spilt.
Whichever you choose, keep the charge port accessible so the tablet can go straight on to charge between shifts. For a tough everyday option, see the Grip Case range. Browse all tablet cases.
Locking the POS app
Locking the POS app
Use both physical and software lockdown, so staff and customers can't exit the POS app.
On iPad, Guided Access locks the device to one app. For devices that need to survive a power cut or restart, Single App Mode through device management is more reliable. A locked enclosure with blocked ports covers the physical side.
Our tablet enclosure guide covers both in detail.
Keeping the screen awake
Keeping the screen awake
On iPad, go to Settings, Display & Brightness, Auto-Lock and select Never, so the screen doesn't time out between orders.
If the setting is greyed out, Low Power Mode is on. If you manage devices centrally, set the timeout in your device management instead. Our tablet enclosure guide covers this in more detail.
Power, PoE and cables
Power, PoE and cables
Power over Ethernet (PoE) delivers power and network over one cable, so you don't need a power outlet at the counter and there's no adapter for anyone to unplug.
It needs a PoE-enabled switch or injector, and suits fixed positions like counters, kiosks and wall-mounted screens. Roaming tablets still need a charging station.
Plan the cable route before you fix the mount. A cable running across a wet counter will get pulled. Whatever you choose, nothing should be running on battery during service. See our power and cables range.
Security and anti-theft
Security and anti-theft
Tablets near the till or entrance are easy targets when the venue is busy.
- Use a locked enclosure, so the tablet can't be removed or unplugged.
- Fix mounts with screws or a through-counter fitting, not adhesive pads.
- Cover the ports and buttons, so customers can't exit the app.
- Remember devices need securing after close too, not just during service.
Find the right hardware for your venue
-
Counter and desk mounts
Explore Desk MountsFixed and rotating mounts and locked enclosures for POS and payment, with clamp options for leased venues.
-
Tablet cases
Explore Tablet CasesStrap, Survivor and waterproof cases for order-at-table and roaming staff. Built to handle drops, spills and long shifts.
-
Floor stands
Explore Floor StandsWeighted stands for self-order kiosks and host stands, so customers can order and pay without queuing.
What to specify
Each part of the venue needs different hardware. Here's what to look for, and what most often gets missed.
| Application | Hardware | Key specification | Most commonly missed |
|---|---|---|---|
| Counter POS | Fixed or rotating counter mount with a locked enclosure | Rotation if customer-facing; angle set from standing height | Cable path decided after the mount is fitted |
| Order-at-table tablet | Strap, Survivor or waterproof case | Corner protection; charging point between shifts | WiFi tested at the counter, not at the tables |
| Kitchen order tablet | Wall mount with a locked enclosure | Clear of steam and heat; wipeable | Mounted above the pass where it fogs and overheats |
| Self-order kiosk | Floor stand or counter enclosure | Weighted base; accessible screen height; PoE | Screen too high for seated users |
| Host stand | Wall or desk mount with a locked enclosure | Locked to your booking app; permanent power | Tablet left on battery and flat by the dinner rush |
Frequently Asked Questions
Where should I start?
Where should I start?
Confirm four things before you buy:
- Which devices you're using. Enclosures are cut for a specific model, so check the exact model, not just the screen size.
- Where power and network reach, and whether you're allowed to add either.
- Whether any screen faces a customer. That decides whether you need a rotating mount.
- Whether the tablet stays put or moves. Fixed positions need a mount. Roaming staff need a case.
If you're fitting out a new venue, talk to us before the counter is built. Cable entry, power and mount positions are cheap to plan at build stage and expensive to retrofit.
Do you supply POS software?
Do you supply POS software?
No. We supply the hardware it runs on and work with whichever POS platform you've chosen, so we can advise on mounting, power and security without pushing you toward a particular software provider.
Which case is best for roaming staff?
Which case is best for roaming staff?
It depends on how they work. Shoulder and hand strap cases suit staff carrying plates. Survivor cases give strong drop protection without a strap. Waterproof cases suit bars and outdoor seating.
Will the enclosure fit my tablet?
Will the enclosure fit my tablet?
Enclosures are made for specific models, so check your exact model first with our iPad model checker. If you use a mix of tablets, a universal mount like the Bouncepad Eddy fits a range of sizes.
Do I need PoE at the counter?
Do I need PoE at the counter?
Not always, but it helps. PoE runs power and network through one cable, so you don't need a power outlet at the counter and there's no adapter to unplug. You'll need a PoE-enabled switch or injector.
Do you offer trade pricing for multi-site groups?
Do you offer trade pricing for multi-site groups?
Yes. Hospitality groups, POS resellers and installers can become a wholesale partner for volume pricing and dedicated support. For help planning a venue, get in touch or call 1800 960 015.